55-ft towable boom lift. Air & water lines and 110V GFI-protected power to the platform. Has an automatic leveling system (leveling capacity-12.5") and self-leveling platform. Need 2" ball on your frame-mounted hitch to tow this lift. Can be towed by a standard half-ton pickup truck - No commercial driver’s license needed.
This 45" x 8" bull float is made from magnesium and is used to level and smooth the surface prior to finishing. Magnesium floats provide a smoother finish than wood floats. Features a lightweight design.
This unit has 4-combo blades, a 36" ring diameter which operates from 60-130 RPM, and has a 5.5 HP gasoline engine. Features a fully enclosed belt guard, an access panel that provides quick access to trowel arms & blades and optimal balance for smooth finishing. Includes lifting eye as standard equipment.
This machine is supplied with a full tank of Regular Gasoline and will need to be returned full.
Bil-Jax® 45-ft towable boom lift. Air & water lines and 110V GFI protected power to the platform. Has an automatic leveling system (leveling capacity-12.5") and self-leveling platform. Need 2" ball on your frame-mounted hitch to tow this lift. Can be towed by a standard half-ton pickup truck - No commercial driver’s license needed.
Lightweight 45-ft self-propelled boom lift. Air & water lines and 110V GFI-protected power to the platform. Has an automatic leveling system (leveling capacity-12.5") and self-leveling platform. Dual power source (DC/Gasoline) allows for indoor and outdoor use. Customer will need a suitably rated trailer to transport this lift. Delivery is available for an additional fee.
6- ft aluminum siding brake.
Material TrimCutter™ available for an additional fee.
Common Bending Capacities:
Material Recommended
Aluminum Coil .032"
Painted Steel Grade D 26 ga.
Galvanized Steel 26 ga.
Stainless Steel (304L) 26 ga.
Zink Alloy (Soft) .032"
Roofing Copper (Soft) 24 oz.
10-ft aluminum siding brake.
Material TrimCutter™ available for an additional fee.
Common Bending Capacities:
Material Recommended
Aluminum Coil .032"
Painted Steel Grade D 26 ga.
Galvanized Steel 26 ga.
Stainless Steel (304L) 26 ga.
Zink Alloy (Soft) .032"
Roofing Copper (Soft) 24 oz.
The Van Mark® Trim cutter uses a unique 4 point track bearing system to ensure the tool does not ride off the brake during the cut. Low profile grip area allows you to direct power along the plane of the cut resulting in one smooth motion that leaves factory edges every time.
The Graco® commercial airless paint sprayer is suitable for oil or latex paints (even stains) when paired with the appropriate spray tip.
The Telpro® Panel Lift 138-2 features a low 36" loading height, tilting cradle, and reaches 11 ft. ceilings (15 ft. when rented with the extension frame). Holds sheets up to 4' x 16' and has a load rating of 150-lbs. Easily rolls with 5" casters. Collapses to fit into the trunk of most cars. The cradle also tilts 65° laterally for loading and applying drywall to sloped ceilings and tilts 10° longitudinally. Easy set up - no tools required.
The Black & Decker® drywall sander is an innovative sanding tool that provides 3.5 amps of sanding power in a lightweight body. This variable speed sander provides a range of 1,400 to 2,000-RPM and features a long, 13-ft static-dissipating vacuum hose to remove potentially harmful dust. This durable sander also features hook-and-loop straps for easy handling or attachment to an external vacuum. Sanding disk diameter is 9-inches.
Sandpaper supplies and Vacuum Bags are an additional charge.
Please note: This rental is for the drywall sander only. The Dewalt HEPA vacuum can be rented for an additional fee.
The Genie® GS-1930 scissor lift is equipped with an efficient, all-electric DC drive system that offers productive power for getting around indoor jobsites with quiet, zero-emissions operation. 115V AC outlet in platform. If customer pick-up, must load onto a rollback flatbed truck. Lift will not load onto a landscape trailer due to a very low ground clearance.
Description
The Genie® SLA™-20 lift is a sturdy, manually operated material lift.
Dewalt® twin tank air compressor.
The Doosan® C185 Diesel air compressor is a tow behind unit and is powered by a powerful Doosan® D18 engine. The 3-cylinder, fuel-efficient engine provides plenty of power for all your various applications. Please note: Need pintel mount or 2" ball to tow- let the Rental Department which mount you will need when making your Reservation.
This machine is supplied with a full tank of Diesel fuel and will need to be returned full. When returning rental, please provide Receipt showing the purchase of Diesel Fuel.
Ingersoll Rand C185 portable air compressor from Doosan Infracore produces 185 cfm at 100 psi. Powered by a 49-horsepower Kubota diesel, the unit weighs 1,825 pounds and measures 66 inches wide and 58 inches tall. Two service air ports allow for use of multiple tools. Single-piece canopy is lockable and lightweight. Design enables cool air to enter the rear and cool internal components. Curbside controls and service valves keep operators away from traffic.
50-ft length of compressor hose for use with Bomag 185cfm towable compressor.
8" wet tile saw. Comes with stand.
MK Diamond® 10" wet tile saw. Comes with stand.
Hilti® Powder Actuated Concrete Nailer
Senco® Pneumatic Roofing Coil Nailer.
The Senco® FramePro 600 nailer drives 2" - 3-1/2" smooth shank nails (Sencote® or plain) and 2" - 3" ring shank nails, 3" screw shank and clipped "D" head nails. Shank diameters include .113, .120, .131, and .148. Regular operating pressure is 70—120 psig.
The Bostitch® Manual Flooring Nailer drives 15.5GA staples and 16GA cleat nails from 1-1/2" to 2" long. Designed for hardwood and engineered flooring installation.
The BOSTITCH BTFP12569 2-in-1 Flooring Tool drives 15.5GA staples and 16GA cleat nails from 1-1/2" to 2" length. It features mallet actuated pneumatic driving action, along with non-marring, interchangeable base plates. This tool is ergonomically designed with longer handle and comfortable rubber grip and is lightweight at 10.85-lbs. Low air requirements at 3.7 SCFM. Designed for hardwood and engineered flooring installation, which helps eliminate gaps between flooring boards. For 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring.
Bostitch® pneumatic finish nailer. 18GA. Fastener range= 5/8 to 2 1/8-inches (BT13 series nails).